Opening and closing the side windows

  1. Front left
  2. Front right
  3. ear right
  4. ear left

The switches for all side windows are located on the driver's door. There is also a switch on each door for the corresponding side window. The switches on the driver's door take precedence.

for the side windows is activated (). The side windows cannot be operated from the rear when the override feature for the side windows is activated ().

  • Turn the SmartKey to position 1 or 2 in the ignition lock.
  • To open: press the corresponding switch.
  • To close: pull the corresponding switch.

closing process is started in the corresponding direction. You can stop automatic If you press the switch beyond the point of resistance, an automatic opening/ closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.

or remove the SmartKey. This function is available for up to five minutes or until You can continue to operate the side windows after you switch off the engine or remove the SmartKey. This function is available for up to five minutes or until the driver's or front-passenger door is opened.

    See also:

    Downhill gradients
    On long and steep gradients, you must reduce the load on the brakes by shifting early to a lower gear. This allows you to take advantage of the engine braking effect and helps avoid overheati ...

    Tachometer
    The red band in the tachometer indicates the engine's overrevving range. Do not drive in the overrevving range, as this could damage the engine. The fuel supply is interrupted to protect th ...

    Releasing seat belts
    - Press release button 4 and guide belt tongue 2 back towards belt sash guide 1. Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or belt tongue will be trapped in ...