Automatic locking feature
The vehicle locks automatically when the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h).
You could therefore be locked out when:
- the vehicle is being pushed.
- the vehicle is being towed.
- the vehicle is being tested on a dynamometer.

- To deactivate: press and hold button 1: for about five seconds until a tone sounds.
- To activate: press and hold button 2 for about five seconds until a tone sounds.
If you press one of the two buttons and do not hear a tone, the relevant setting
has already been selected.
You can also switch the automatic locking function on and off using the on-board computer ().
See also:
Engine number
Emission control information plate, including the certification of both
federal and Californian emissions standards
Engine number (stamped into the crankcase)
VIN (on the lower edge of the ...
Power washers
WARNING
Do not use power washers with circular-jet
nozzles (dirt grinders) to clean your vehicle, in
particular the tires. You could otherwise
damage the tires and cause an accident.
Alway ...
The first 1000 miles (1500 km)
The more you look after the engine when it is
new, the more satisfied you will be with its
performance in the future.
- Drive at varying vehicle speeds and engine
speeds for the first 1000 mile ...
