Changing the settings of the locking system
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
- To change the setting: press and hold down the
and
buttons simultaneously for approximately
six seconds until the battery check lamp () flashes twice.
If the setting of the locking system is changed within the signal range of
the vehicle, pressing the or
button locks or unlocks the vehicle.
The SmartKey now functions as follows:
- To unlock the driver's door: press the
button once.
- To unlock centrally: press the
button twice.
- To lock centrally: press the
button.
The KEYLESS-GO function is changed as follows:
- To unlock the driver's door: touch the inner surface of the door handle on the driver's door.
- To unlock centrally: touch the inner surface of the door handle on the frontpassenger door or the rear door.
- To lock centrally: touch the outer sensor surface on one of the door handles.
See also:
Activating/deactivating ATTENTION ASSIST
Press the
or
button on the
steering wheel to select the DriveAssist
menu.
Press the
or
button to select
Attention Asst..
Press
.
The current selection is displayed.
To activate/ ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences ...
Vehicle identification plate
Even if you have calculated the total load
carefully, you should still make sure that the
gross vehicle weight rating and the gross axle
weight rating are not exceeded. Details can
be found on ...