SRS warning lamp

SRS functions are checked regularly when you switch on the ignition and when the engine is running. Therefore, malfunctions can be detected in good time.

The cluster lights up when the ignition is switched on. It goes out no later than a SRS warning lamp in the instrument cluster lights up when the ignition is switched on. It goes out no later than a few seconds after the engine is started.

The SRS components are in operational readiness when the engine is running . SRS warning lamp is not lit while the engine is running .

WARNING WARNING

The SRS self-check has detected a malfunction if the SRS warning lamp:

  • does not come on at all
  • fails to go out approximately 4 seconds after the engine was started
  • comes on after the engine was started or while driving

For your safety, Mercedes-Benz strongly recommends that you have the system checked as soon as possible at an authorized Mercedes-Benz Center. Otherwise the SRS may not be activated when it is needed in an accident, which could result in serious or fatal injury. The SRS might also deploy unexpectedly and unnecessarily which could also result in injury.

In addition, improper work on the SRS creates a risk of rendering the SRS inoperative or causing unintended air bag deployment. Work on the SRS must therefore only be performed by qualified technicians. Contact an authorized Mercedes-Benz Center.

If it is necessary to modify an air bag system to accommodate a person with disabilities, contact an authorized Mercedes-Benz Center for details. USA only: Call our Customer Assistance Center at 1-800-FOR-MERCedes (1-800-367-6372) for details.

    See also:

    Cleaning the rear view camera
    Use clear water and a soft cloth to clean camera lens 1. Do not clean the camera lens and the area around the rear view camera with a power washer. ...

    Replacing the rear window wiper blade
    Removing the wiper blade Removing the wiper blade Remove the SmartKey from the ignition lock. Fold wiper arm 1 away from the rear window until it engages. Position wiper blade 2 at a righ ...

    Warning and display messages in the multifunction display
    Activate ATTENTION ASSIST using the onboard computer. Symbol 1 appears in the multifunction display. If ATTENTION ASSIST is active, you will be warned no sooner than 20 minutes after your ...