Checking tire pressure electronically

2 in the ignition lock. Make sure that the SmartKey is in position 2 in the ignition lock.

button on the Press the button on the or steering wheel to select the Service button on the steering wheel to select the Service menu.

button to select Press the button to select or Tire Pressure. button to select Tire Pressure.

The current tire pressure for each wheel will Press the The current tire pressure for each wheel will button.

The current tire pressure for each wheel will be displayed in the multifunction display.

If the vehicle has been parked for longer than 20 minutes, the Tire Pressures Displayed After Driving A Few Minutes message appears in the display.

After a teach-in period, the tire pressure monitor automatically recognizes new wheels or new sensors. If a clear allocation of the tire pressure values to the individual wheels is not possible, the Tire Pressure Monitor Active message is shown instead of the tire pressure display. The tire pressures are already being monitored.

is mounted, the system may continue to If a spare wheel/emergency spare wheel is mounted, the system may continue to show the tire pressure of the wheel that has been removed for a few minutes. If this occurs, note that the value displayed for the position where the spare tire is mounted is not the same as the spare wheel/emergency spare wheel's current tire pressure.

    See also:

    Cleaning the sensors
      Clean sensors 1 of the driving systems with water, car shampoo and a soft cloth. When cleaning the sensors with a power washer, maintain a distance between the vehicle and the nozzl ...

    Fast forward/rewind
    While the display/selection window is active, slide and hold the COMAND controller until the desired position has been reached. ...

    Matte finish care
    If your vehicle has a clear matte finish, observe the following instructions in order to avoid damage to the paintwork due to incorrect care. These notes also apply to light alloy wheels with a ...