Removing a wheel
Unscrew the uppermost wheel bolt
completely.
Screw alignment bolt 1 into the thread
instead of the wheel bolt.
Unscrew the remaining wheel bolts fully.
Do not place wheel bolts in sand or on a
dirty surface. The bolt and wheel hub
threads could otherwise be damaged when
you screw them in.
Remove the wheel.
See also:
Chassis and suspension: Agile handling and high comfort
The AGILITY CONTROL suspension, which is standard equipment in both the
C-Class Saloon and Estate, harmonises perfectly with the dynamic design. It is
based on an amplitude-dependent damping syste ...
Making adjustments in 1 mph (Canada:
1 km/h) increments
Briefly press the cruise control lever to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/Stop b ...