Cleaning the display
Before cleaning the display, make sure that
it is switched off and has cooled down.
Clean the display surface using a
commercially-available microfiber cloth
and TFT/LCD display cleaner.
Dry the display surface using a dry
microfiber cloth.
For cleaning, do not use any of the
following:
• alcohol-based thinner or gasoline
• abrasive cleaning agents
• commercially-available household
cleaning agents
These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display.
See also:
Daytime running lamps
Daytime running lamps in Canada
The daytime running lamps function is
required by law in Canada. It cannot therefore
be deactivated.
Turn the light switch to
or
.
With the engine running: d ...
General notes
If the vehicle can no longer be locked or
unlocked with the SmartKey, use the
mechanical key.
If you use the mechanical key to unlock and
open the driver's door or the trunk lid/
tailgate, th ...
Bag hooks
The bag hook can bear a maximum load of 11 lbs (5 kg). Do not use it to secure
a load.
There is one bag hook on the left side wall in the cargo compartment and there
are two hooks on the right ...
