Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/Stop button repeatedly until all
indicator lamps in the instrument cluster have
gone out. The windshield wipers could
otherwise move and injure you.
Only fold the windshield wipers away from
the windshield when vertical. Otherwise,
you will damage the hood.
Do not pull the wiper blade. Otherwise,
the wiper blade could be damaged.
Do not clean wiper blades too often and
do not rub them too hard. Otherwise, the
graphite coating could be damaged. This
could cause wiper noise.
Fold the wiper arms away from the
windshield.
Carefully clean the wiper blades with a
damp cloth.
Fold the windshield wipers back again
before switching on the ignition.
Hold the wiper arm securely when folding
back. The windshield could be damaged if
the wiper arm smacks against it suddenly.
See also:
Instruction labels for tires and loads
WARNING
Do not overload the tires by exceeding the
specified load limit as indicated on the Tire
and Loading Information placard on the
driver's door B-pillar. Overloading the tires
c ...
Engine oil
Notes on the oil level
Depending on the driving style, the vehicle
consumes up to 0.9 US qts. (0.8 l) of oil over
a distance of 600 miles (1000 km). The oil
consumption may be higher than this ...
Setting the temperature in the rear
compartment using the front control
panel
Turn the SmartKey to position 2 in the
ignition lock.
Activate the rear compartment
function via COMAND.
The rear-compartment climate control can
be controlled via the front control panel
...
