Activating the rear view camera
Make sure that the SmartKey is in position
2 in the ignition lock.
Engage reverse gear.
The area behind the vehicle is shown in the COMAND display with guide lines.
See also:
Checking the vehicle and trailer weight
- To check that the weights of the towing
vehicle and the trailer comply with the
maximum permissible values, have the
vehicle/trailer combination (including the
driver, passengers, and cargo ...
Making adjustments in 5 mph (Canada:
10 km/h) increments
Briefly press the cruise control lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Low-beam headlamps
•► To switch on the low-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
•► Turn the light switch to .
The indicator lamp in the instrument
...