View through the camera
The area behind the vehicle is displayed in a mirror-inverted manner, as in the rear-view mirror.
WARNING
The rear view camera is only an aid and may
display obstacles
• from a distorted perspective
• inaccurately
• may not display obstacles at all
The rear view camera does not relieve you of
the responsibility to be cautious. Take care
and pay careful attention. The rear view
camera may not show objects which are
• very close to the rear bumper
• under the rear bumper
• above the trunk handle
You are responsible for safety at all times and
must continue to pay attention to the
immediate surroundings when parking and
maneuvering. This includes the area behind,
in front of, and beside the vehicle. Otherwise
you could endanger yourself and/or others.
WARNING
The rear view camera will not function or will
not fully function if:
• the trunk lid is open
• it is raining or snowing strongly or if it is foggy
• it is night or if you are parking/ maneuvering your vehicle in a very dark
area
• a very bright white light is affecting the camera
• the immediate vicinity is illuminated with fluorescent light (the display of
the COMAND system can flicker)
• temperature changes abruptly, for example if you drive out of the cold into a
heated garage (condensation on the lens)
• the camera lens is dirty or covered
• the rear of your vehicle is damaged
In this case, have the position and the
setting of the camera checked at a
specialist workshop. Mercedes-Benz
recommends that you consult a Mercedes-
Benz Center for this purpose.
Do not use the rear view camera in these
situations. You could otherwise injure
yourself and other people and/or cause
damage - including damage to your vehicle -
while parking/maneuvering.
See also:
Restarting the tire pressure monitor
WARNING
It is the driver's responsibility to set the tire
pressure to the recommended cold tire
pressure. Underinflated tires affect the ability
to steer or brake the vehicle. You might los ...
Setting a speed
WARNING
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing road co ...
Displaying destination information
Prerequisite: you have entered a destination
and possibly an intermediate
stop.
To activate navigation mode: press the
function button once or twice.
To show the menu: press
the COMAND ...
