Applying/releasing manually
To apply: press handle 1.
The red
(USA only) or
(Canada
only) indicator lamp in the instrument
cluster lights up.
The electric parking brake can also be
applied when the SmartKey is removed.
To release: switch on the ignition.
Pull handle 1.
The red
(USA only) or
(Canada
only) indicator lamp in the instrument
cluster goes out.
The electric parking brake cannot be
released unless the SmartKey is in position
1 in the ignition lock or if the ignition has
been switched on using the Start/Stop
button.
See also:
Setting the side air vents
► To open/close: turn thumbwheel 3 to the
left or right.
Side window defroster vent 1 is never
completely shut, even if side air vent 2 is
shut. ...
Vehicle identification number (VIN)
The vehicle identification number (VIN) can be found in the following locations:
on the vehicle identification plate ()
on the lower edge of the windshield ()
In addition to being stamped on ...
Rear fog lamp
To switch on the rear fog lamp: turn the SmartKey in the ignition lock
to position 2 or start the engine.
Turn the light switch to
or or
.
If the light switch is set to or
, the re ...
