Hill start assist

Hill start assist helps you when pulling away forwards or in reverse on an uphill gradient.
It holds the vehicle for a short time after you have removed your foot from the brake pedal.
This gives you enough time to move your foot from the brake pedal to the accelerator pedal and depress it before the vehicle begins to roll.

WARNING
Never leave the vehicle when it is held by hill start assist. After approximately one second, hill start assist will no longer brake your vehicle and it could roll away.

Once you have taken your foot off the Take your foot off the brake pedal.

brake pedal, the vehicle is held for around Once you have taken your foot off the brake pedal, the vehicle is held for around one second.

Hill start assist will not function if: Pull away.

Hill start assist will not function if:

• you are pulling away on a level road or a downhill gradient.

• the transmission is in position N.

• the electric parking brake is applied.

• ESP® is malfunctioning.

    See also:

    Function restrictions
    For safety reasons, some COMAND functions are restricted or unavailable while the vehicle is in motion. You will notice this, for example, because you will either not be able to select certain ...

    Overview of interior lighting
    Front overhead control panel 1 Switches the left-hand reading lamp on/off 2 Switches the rear interior lighting on/off 3 Switches the front interior lighting on/off 4 Switc ...

    Setting the temperature in the rear compartment using the front control panel
    Turn the SmartKey to position 2 in the ignition lock. Activate the rear compartment function via COMAND. The rear-compartment climate control can be controlled via the front control panel ...