Important safety notes

WARNING
For safety reasons, switch off the windshield wipers and remove the key from the ignition lock before changing the wiper blades (vehicles with KEYLESS-GO: make sure that the on-board electronics are in state 0).
Otherwise, the wiper motor could be switched on suddenly and cause injury.

make sure that you touch only the wiper To avoid damaging the wiper blades, make sure that you touch only the wiper arm of the wiper.

arm has been folded away from the Never open the hood if a windshield wiper arm has been folded away from the windshield.

Never fold a windshield wiper arm without a wiper blade back onto the windshield.

Hold the windshield wiper arm firmly when you change the wiper blade. If you release the windshield wiper arm without a wiper blade and it falls onto the windshield, the windshield may be damaged by the force of the impact.

Mercedes-Benz recommends that you have the wiper blades replaced by a qualified specialist workshop, e.g. at an authorized Mercedes-Benz Center.

arms vertically before folding them away Always position the windshield wiper arms vertically before folding them away from the windshield. By doing so, you will avoid damage to the hood.

    See also:

    Setting the temperature in the rear compartment using the front control panel
    Turn the SmartKey to position 2 in the ignition lock. Activate the rear compartment function via COMAND. The rear-compartment climate control can be controlled via the front control panel ...

    Installing/removing the towing eye
    Installing the towing eye •► Remove the towing eye from the vehicle tool kit WARNING The exhaust tail pipe may be hot. You could burn yourself if you touch the tail pipe. Be particu ...

    MAX COOL maximum cooling
    The MAX COOL function is only available in vehicles for the USA. MAX COOL is only operational when the engine is running. When you activate MAX COOL, climate control switches to the following ...