High-beam headlamps
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
Turn the light switch to 
.
Press the combination switch beyond the
pressure point in the direction of
arrow 1.
The 
indicator lamp in the
instrument
cluster lights up.
To switch off the high-beam
headlamps: move the combination switch
back to its normal position.
The indicator lamp in the
instrument
cluster goes out.
See also:
Unlocking the trunk (mechanical key)
The trunk lid swings upwards when
opened. Therefore, make sure that there is
sufficient clearance above the trunk lid.
If the trunk cannot be unlocked with the
SmartKey or KEYLESS-GO, use the ...
ETS/4ETS (Electronic Traction System)
WARNING
Observe "Important safety notes".
Traction control is part of ESP®.
Traction control brakes the drive wheels
individually if they spin. This enables you to
pull away and acc ...
Making adjustments in 1 mph (Canada:1 km/h) increments
► Briefly press the cruise control lever
to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
The last speed stored is increased or
reduced. ...