Transferring data to another system (vehicle)

card or USB stick) with the saved data into/ Insert/connect the storage medium (SD card or USB stick) with the saved data into/ to the relevant interface.

turning the COMAND controller and Select Vehicle in the main function bar by turning press to confirm. the COMAND controller and press The "Vehicle" menu appears. to confirm.

The "Vehicle" menu appears.

confirm. Select System and press confirm. to confirm.

to confirm. Select Upload/Download Data and press Select Import Data from Storage to confirm.

Medium and press to confirm. Select Import Data from Storage Medium and press Select Start Data Import. to confirm.

A prompt appears, asking whether the Select Start Data Import.

A prompt appears, asking whether the COMAND data should be overwritten.

COMAND should be overwritten. Press Yes to confirm that the data saved in COMAND should be overwritten.

COMAND imports the data and restarts the system.

or

Lights and windshield wipers Press No to cancel the import process.

    See also:

    Introduction
    SRS consists of: • the SRS warning lamp • air bags • air bag control unit (with crash sensors) • Emergency Tensioning Devices • belt force limiters SRS reduces the risk of occupants coming in ...

    Kilopascal (kPa)
    Metric unit for tire pressure. 6.9 kPa is the equivalent of 1 psi. Another unit for tire pressure is bar. There are 100 kilopascals (kPa) to 1 bar. ...

    Switching the ECO function on/off
    The ECO start/stop function switches the engine off automatically if the vehicle is stopped under certain conditions. When pulling away again, the engine starts automatically. You can switch ...