Setting the ambient light

You can make the following settings:
• SOLAR (yellow interior lighting)
• NEUTRAL (white interior lighting)
• POLAR (blue interior lighting)
• Brightness of the interior lighting on a scale of 0 (off) to 5 (bright)

To set the ambient lighting: select

Vehicle in the main function bar by sliding To set the ambient lighting: select Vehicle in the main function bar by sliding the COMAND and turning controller and press to confirm. the COMAND controller and press The main area is active. to confirm.

The main area is active.

sliding or turning Select the Ambient Lighting menu by sliding the COMAND or turning controller. the COMAND controller.

The ambient lighting menu appears. The current setting is indicated by a dot. dot.

or turning Select Setting by sliding or turning or turning The selected setting is indicated by a the COMAND controller.

The selected setting is indicated by a dot. dot.

    See also:

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are ...

    Important safety notes
    WARNING When operating the climate control, the air that enters the passenger compartment through the air vents can be very hot or very cold (depending on the set temperature). This could c ...

    Removing a wheel
    – Unscrew the uppermost wheel bolt completely. – Screw alignment bolt 1 into the thread instead of the wheel bolt. – Unscrew the remaining wheel bolts fully. Do not place wheel bolts in ...