Selecting CD/audio DVD/MP3 discs
Selecting via the media list
In CD/audio DVD and MP3 mode: select
Media by sliding 
or turning
the
COMAND controller and press 
to
confirm.
The media list appears. The 
dot
indicates the currently selected medium.
Media list
The media list shows the discs currently available.
If a disc cannot be read, an entry appears
after the display in the magazine tray.
Select the data medium by turning
the COMAND controller and press to
confirm.
If you select a video DVD, the system
switches to video DVD mode.
Selecting a track using the number keypad
Press a number button, e.g. 
,
when the
display/selection window is active.
The medium at the corresponding position in the media list is loaded and then played.
See also:
Securing the vehicle to prevent it fromrolling away
WARNING
Only jack up the vehicle on level ground or on
slight inclines/declines. The vehicle could
otherwise fall off the jack and injure you or
others.
If your vehicle is equipped wi ...
Operating the on-board computer
The on-board computer is activated as soon
as you turn the SmartKey to position 2 in the
ignition lock.
You can control the multifunction display and
the settings in the on-board computer using ...
3-zone automatic climate control
Automatic climate control climate zones
You can select different temperature settings
for the driver's and front-passenger sides as
well as for the rear compartment.
Turn the SmartKey to posi ...