Special seat belt retractor

All seat belts except the driver's seat belt are equipped with a special seat belt retractor.

When activated, the special seat belt retractor ensures the seat belt will not slacken once the child restraint system has been secured.

Installing a child restraint system:
installation instructions. Always comply with the manufacturer's installation instructions.
reel. Pull the seat belt smoothly from the inertia reel.
buckle. Engage the seat belt tongue in the belt buckle.

Activating the special seat belt retractor:
reel retract it again. Pull the seat belt out fully and let the inertia reel retract it again.
While the seat belt is retracting, you should hear a ratcheting sound. The special seat belt retractor is enabled.
take up any slack. Push down on the child restraint system to take up any slack.

Removing a child restraint system/deactivating the special seat belt retractor:
installation instructions. Always comply with the manufacturer's installation instructions.
guide the belt tongue to the belt outlet. Press the seat belt release button and guide the belt tongue to the belt outlet.
The special seat belt retractor is deactivated.

WARNING
Never release the seat belt buckle while the vehicle is in motion, since the special seat belt retractor will be deactivated.

    See also:

    Operating the rear roller sunblind
    Operating from the front WARNING When opening or closing the rear roller sunblind, make sure no one is in danger of being injured by the opening or closing procedure. The rear roller sunb ...

    Using the SmartKey
    The SmartKey must be close to the driver's door handle. Point the tip of the SmartKey at the driver's door handle. Press and hold the button until the side windows and the sliding sunr ...

    Replacing the windshield wiper blades
    Removing the wiper blades ► Remove the SmartKey from the ignition lock. ► Fold the wiper arm away from the windshield. ► Press both release clips 2. ► Fold wiper blade ...