Installing/removing the towing eye
Installing the towing eye
•► Remove the towing eye from the vehicle tool kit
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particularly careful when removing the rear
cover.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.
Example: Sedan
•► Press the mark on cover 1 inwards in the direction of the arrow.
•► Take cover 1 off the opening.
•► Screw the towing eye in clockwise to the stop and tighten it.
Removing the towing eye
•► Loosen the towing eye and unscrew it.
•► Attach cover 1 to the bumper and press until it engages.
•► Place the towing eye in the vehicle tool kit.
See also:
Removing a wheel
Unscrew the wheel bolts.
Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel
hub threads could otherwise be damaged when you screw them in.
Remove the wheel.
...
Premium-grade unleaded gasoline
To ensure the longevity and full
performance of the engine, only premiumgrade
unleaded gasoline may be used.
If there is no premium-grade unleaded
gasoline available and regular-grade
un ...
Operation with an active COMAND
source
You can transfer an audio or video mode
selected in COMAND to the Rear Seat
Entertainment System.
If you subsequently switch modes in
COMAND, the new source will not be
transmitted to the Re ...