EASY-PACK folding floor with stowage compartment under the trunk floor (Wagon)

Important safety notes

WARNING
Do not carry unsecured objects under the EASY-PACK folding luggage-compartment floor if it is open.

Otherwise, you and other vehicle occupants could be injured by objects being thrown around the vehicle in the event of sharp braking, a sudden change in direction or an accident.

! Do not apply pressure to the EASY-PACK folding luggage-compartment floor when it is fully open. You may otherwise damage the hinges of the EASY-PACK folding luggage-compartment floor.

Opening and closing the folding luggage-compartment floor

A removable insert under the EASY-PACK folding luggage-compartment floor contains the parts of the EASY-PACK load-securing kit and a folding box. Beneath the insert, you will find the TIREFIT kit, the "Minispare" emergency spare wheel, the vehicle tool kit, etc.

•► To open: open the tailgate.

•► To open: open the tailgate.

•► Holding the ribbing, press handle 1 downwards 2.

Handle 1 folds upwards.

•► Pull EASY-PACK folding luggagecompartment

•► Pull EASY-PACK folding luggagecompartment floor 3 in the direction of the arrow by handle 1 until it reaches the desired position and engages in side 4.

► To close: disengage the EASY-PACK folding luggage-compartment floor and pull it back.

•► Press the EASY-PACK folding luggagecompartment floor down 2 until it engages.

Installing and removing the folding luggage-compartment floor

•► Remove the combined cargo cover and net

120˚ position

120˚ position

•►  To remove: move EASY-PACK folding luggage-compartment floor 1 into the 120˚ position and lift it upwards.

•► To install: push EASY-PACK folding luggage-compartment floor 1 to the stop, move it into the 120˚ position and make sure it engages audibly.

•► Pull EASY-PACK folding luggagecompartment floor 1 forwards.

    See also:

    Socket in the front-compartment center console
    To open: slide cover 1 forwards until it engages. Lift up the cover of socket 2. To close: press cover 1 briefly at the front. The cover moves back. ...

    Opening
    Switch off the engine. Remove the SmartKey from the ignition lock. KEYLESS-GO: open the driver’s door. This switches the ignition to position 0, which corresponds to having removed the Sma ...

    Turn signals
    1 High-beam headlamps 2 Right turn signal 3 High-beam flasher 4 Left turn signal ► To indicate briefly: press the combination switch briefly to the pressure point in the direction of a ...