Installing/removing the combined cargo cover and net
You can reach the combined cargo cover and net to install and remove it from the cargo compartment and, with the seat backrest folded forwards, from the left-hand rear door.
•► Make sure that the cargo net and the cargo compartment cover are rolled up.

•► To remove: press button 2.
•► Fold the combined cargo cover and net forwards on the left-hand side with the seat backrest folded forwards, and fold it backwards with the seat backrest folded up.
•► First, detach the combined cargo cover and net from left-hand catch 1 and then remove it from right-hand fixture 3.
•► To install: push the combined cargo cover and net up to the stop into right-hand fixture 3.
•► Place the combined cargo cover and net into the left-hand fixture and push it into catch 1 until the combined cargo cover and net engages audibly.

•► Make sure that red lock status indicator 4 is no longer visible. The combined cargo cover and net will otherwise not be locked in place.
See also:
Installing the towing eye
Vehicles with a trailer tow hitch: if possible, secure the towing device on the
trailer tow hitch ().
X Remove the towing eye from the vehicle tool kit ().
WARNING
The exhaust tail pipe may ...
Maximum gradient-climbing capability
If the load on the front axle is reduced when pulling away on a steep uphill
slope, the front wheels have a tendency to spin. 4ETS recognizes this and brakes
the wheels accordingly. The rear wh ...
Accepting a call
If someone calls you when you are in the Tel
menu, a display message appears in the
multifunction display, for example:
•► Press the button on the
steering
wheel to accept an incomin ...
