Seat belt

Problem Possible causes/consequences and •► Solutions

engine, the red seat After starting the engine, the red seat belt warning lamp lights up for six seconds.

The seat belt warning lamp reminds the driver and front passenger to fasten their seat belts.

•► Fasten your seat belt

engine, the red seat After starting the engine, the red seat belt warning lamp lights up. In addition, a warning tone sounds for up to six seconds.

Risk of injury
 The driver's seat belt is not fastened.

•► Fasten your seat belt.

The warning tone ceases.

warning lamp lights up The red seat belt warning lamp lights up after the engine starts, as soon as the driver's or the front-passenger door is closed.

Risk of injury
 The driver or front passenger has not fastened their seat belt.

•► Fasten your seat belt.

The warning lamp goes out.

Risk of injury
 There are objects on the front-passenger seat.

•► Remove the objects from the front-passenger seat and stow them in a secure place.

The warning lamp goes out.

warning lamp flashes The red seat belt warning lamp flashes and an intermittent audible warning sounds.

Risk of injury
 The driver or front passenger has not fastened their seat belt. In addition, you are driving faster than 15 mph (25 km/h) or you have briefly driven faster than 15 mph (25 km/h).

•► Fasten your seat belt.

The warning lamp goes out and the intermittent warning tone ceases.

Risk of injury
 There are objects on the front-passenger seat. In addition, you are driving faster than 15 mph (25 km/h) or you have briefly driven faster than 15 mph (25 km/h).

•► Remove the objects from the front-passenger seat and stow them in a secure place.

The warning lamp goes out and the intermittent warning tone ceases.

    See also:

    2011 Mercedes-Benz GLK-Class Review
    It's funny how an automaker can be ahead of the curve one moment and playing catch-up the next. Mercedes-Benz helped make luxury SUVs mainstream when it debuted the midsize M-Class for the 1998 mo ...

    Adaptive Highbeam Assist
    You can use this function to set the headlamps to change between low beam and high beam automatically. The system recognizes vehicles with their lights on, either approaching from the opposite ...

    Example of operation
    Initial situation You would like to switch from the vehicle function to the radio function and select a station from the station list, for example. The following operating example describes ...