DISTRONIC PLUS displays in the multifunction display

General notes

You can select the distance display in the Assistance menu  of the onboard computer.

Display when DISTRONIC PLUS is deactivated

•► Select the Distance Display function using the on-board computer

When DISTRONIC PLUS is deactivated, you will see the following in the multifunction display:

1. Symbol for activated PRE-SAFE® Brake

1. Symbol for activated PRE-SAFE® Brake
2. Vehicle in front, if detected
3. Distance indicator, current distance to the vehicle in front
4. Specified minimum distance to the vehicle in front; adjustable
5. Own vehicle

Display when DISTRONIC PLUS is activated

Select the Distance Display function using the on-board computer

You will see the stored speed for about five seconds when you activate DISTRONIC PLUS.

After this time, you will see the following in the multifunction display while DISTRONIC PLUS is activated:

1. DISTRONIC PLUS activated

1. DISTRONIC PLUS activated
2. Own vehicle
3. Specified minimum distance to the vehicle in front; adjustable
4. Vehicle in front, if detected

    See also:

    Calling up a stored setting
    If you want to move the seat from the fully reclined position to a stored seat position, first raise the backrest. The seat could otherwise be damaged. Press and hold the relevant storage positi ...

    Daytime running lamps
    Daytime running lamps in Canada The daytime running lamps function is required by law in Canada. It cannot therefore be deactivated. •► Turn the light switch to or . With the engine run ...

    Load index
    In addition to the load bearing index, the load index may also be imprinted on the sidewall of the tire. This specifies the load bearing capacity more precisely. ...