Starting procedure with the SmartKey
To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/ Stop button out of the ignition lock.
•► To start a gasoline engine: turn the SmartKey to position 3 in the ignition lock and release it as soon as the engine is running.
•► To start a diesel engine: turn the SmartKey to position 2 in the ignition lock.
http://strategic-human-resource.com/The 
preglow indicator lamp in the
instrument cluster lights up.
•► When the 
preglow indicator lamp
goes out, turn the SmartKey to position 3 and release it as soon as the
engine is running.
You can start the engine without preglow if the engine is warm.
See also:
Cargo compartment enlargement
Important safety notes
WARNING
Always lock the seat backrest in its upright position when the rear seat bench
is occupied, or the extended cargo volume is not in use.
Check for secure lockin ...
Making adjustments in 1 mph (Canada: 1 km/h) increments
Briefly press the cruise control
lever to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Important safety notes
WARNING
Do not adjust the steering wheel while driving.
Adjusting the steering wheel while driving
could cause the driver to lose control of the
vehicle.
The electrical steering wheel adjus ...