Defrosting the windshield
You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.
You should only select the defrosting function until the windshield is clear again.
•► Turn the SmartKey to position 2 in the ignition lock.
•► To activate: press the
button.
The indicator lamp above the
button
lights up.
The climate control system switches to the following functions:
- cooling with air dehumidification on
- high airflow
- high temperature
- air distribution to the windshield and
front side windows
- air-recirculation mode off
•► To switch off: press the
button.
The indicator lamp above the
button
goes out. The previously selected settings
come into effect again. The cooling with air
dehumidification function remains on. Airrecirculation
mode remains deactivated.
or
•► Press the
button.
The indicator lamp above the
button
goes out. Airflow and air distribution are set
to automatic mode.
or
•► Automatic climate control: press temperature button 9 or 12 up or down.
Automatic climate control: press
temperature button 10 or 14 up or down.
or
•► Dual-zone automatic climate control:
press switch 11 up or down.
3-zone automatic climate control: press button 12 up or down
See also:
Importing contacts automatically
If a mobile phone is connected to COMAND
via the Bluetooth® interface, the contacts
(phone book entries) of the mobile phone are
automatically imported into COMAND's
phone book.
Depending on ...
Additives in gasoline
One of the main problems of poor fuel quality is the forming
of deposits that are caused during the gasoline combustion process. Mercedes-Benz
recommends that you use fuel brands that have the add ...
Unlocking the trunk (Sedan)
The trunk lid swings upwards when
opened. Therefore, make sure that there is
sufficient clearance above the trunk lid.
If the trunk cannot be unlocked with the
SmartKey or KEYLESS-GO, use the
...
