High-beam headlamps
•► To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
•► Turn the light switch to 
or 
.
•► Press the combination switch beyond the pressure point in the direction of arrow 1.
In the position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The 
indicator lamp in the
instrument
cluster lights up when the high-beam
headlamps are switched on.
•► To switch off the high-beam headlamps: move the combination switch back to its normal position.
The 
indicator lamp in the
instrument
cluster goes out.
See also:
Information about driving abroad
Converting to symmetrical low beam
when driving abroad: switch the headlamps
to symmetrical low beam in countries in
which traffic drives on the opposite side of the
road to the country where the ...
Replacing the windshield wiper blades
Removing the wiper blades
Remove the SmartKey from the
ignition lock or turn it to position 0 (KEYLESS-GO).
Fold the wiper arm away from the
windshield until it engages.
Set the wiper blade ...
Connecting a mobile phone
General information
Before using your mobile phone with
COMAND for the first time, you will need to
connect it.
When you authorize a new mobile phone, it is
connected automatically.
Connectin ...