Turn signals
1. High-beam headlamps
2. Right turn signal
3. High-beam flasher
4. Left turn signal
•► To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow 2 or 4.
The corresponding turn signal flashes three times.
•► To indicate: press the combination switch beyond the pressure point in the direction of arrow 2 or 4.
See also:
Emergency Tensioning Devices, belt force limiters
The front seat belts and the outer seat belts
in the rear are equipped with ETDs and seat
belt force limiters.
The ETDs tighten the seat belts in an accident,
pulling them close against the bod ...
Opening and closing the sidewindows
1 Front left
2 Front right
3 Rear right
4 Rear left
The switches for all side windows are located
on the driver's door. There is also a switch on
each door for the corresponding side window.
...
Notes for 4MATIC vehicles
Vehicles with 4MATIC must not be towed
with either the front or the rear axle raised,
as doing so will damage the transmission.
If the vehicle has transmission damage or
damage to the front or ...