Automatic headlamp mode

To switch on automatic headlamp mode: turn the light switch to or or SmartKey in position 1 in the ignition lock:.

SmartKey in position 1 in the ignition lock:

the parking lamps are switched on or off automatically depending on the brightness of the ambient light.

With the engine running: depending on the brightness of the ambient light, the daytime running lamps or the low-beam headlamps are switched on or off automatically.

When the low-beam headlamps are switched on, the the indicator lamp in the instrument cluster lights up.

WARNING
If the light switch is set to or , the or low-beam headlamps will not come on, the low-beam headlamps will not come on automatically if it is foggy. This could endanger you and others. Therefore, turn the light switch to The automatic headlamp feature is only an in fog.

The automatic headlamp feature is only an aid. The driver is responsible for the vehicle's lighting at all times.

    See also:

    Opening
    •► Switch off the engine. •► Remove the SmartKey from the ignition lock. KEYLESS-GO: open the driver’s door. This switches the ignition to position 0, which corresponds to having r ...

    Changing the battery
    You require a CR 2025 3 V cell battery. - Take the mechanical key out of the SmartKey. - Press mechanical key 2 into the opening in the SmartKey in the direction of the arrow until battery t ...

    Activating/deactivating the rear view camera
    – To activate: make sure that the SmartKey is in position 2 in the ignition lock. – Make sure that the "rear view camera" function is selected in COMAND (see the separate operating in ...