Dynamic function
The dynamic function adjusts the air cushions in the side bolsters of the seat backrests to ensure ideal lateral support at all times.
You can choose between two different levels.
| Level 1 (one indicator lamp) | Standard setting:
slightly increased lateral support and slow build-up of air pressure in the side bolsters of the seat backrest. |
| Level 2 (two indicator lamps) | Sport setting:
increased lateral support and fast build-up of pressure in the side bolsters of the seat backrest. |
•► To switch on: press button 2 once or twice until the desired level is set.
One or two indicator lamps in button 2 light up.
•► To switch off: press button 2 repeatedly until all indicator lamps in button 2 go out.
See also:
Activating/deactivating the MONO function
This function is only available in vehicles for Canada.
You can use the MONO function to adopt the temperature and air distribution settings
on the driver's side for the front-passenger side.
...
Maximum loaded vehicle weight
The maximum weight is the sum of the curb
weight of the vehicle, the weight of the
accessories, the total load limit and the
weight of the optional equipment installed at
the factory. ...
Servicing the brakes
If the red brake warning lamp lights up in
the instrument cluster and you hear a
warning tone while the engine is running,
the brake fluid level may be too low.
Observe additional warning messa ...