Automatic locking feature

The vehicle locks automatically when the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h).

You could therefore be locked out when:
- the vehicle is being pushed.
- the vehicle is being towed.
- the vehicle is being tested on a dynamometer.

•► To deactivate: press and hold button 1

•► To deactivate: press and hold button 1 for about five seconds until a tone sounds.

•► To activate: press and hold button 2 for about five seconds until a tone sounds.

i If you press one of the two buttons and do not hear a tone, the relevant setting has already been selected.

You can also switch the automatic locking function on and off using the on-board computer

    See also:

    Using the TIREFIT kit
    You can use the TIREFIT kit to seal small punctures, particularly those in the tire tread. You can use TIREFIT at outside temperatures down to -4 °F (-20 °C). WARNING TIREFIT is a limited ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differenc ...

    Cleaning the sensors
      Clean sensors 1 of the driving systems with water, car shampoo and a soft cloth. When cleaning the sensors with a power washer, maintain a distance between the vehicle and the nozzl ...