ATA (Anti-Theft Alarm system)

A visual and audible alarm is triggered if the alarm system is armed and you open:

- a door
- the vehicle with the mechanical key
- the trunk lid/tailgate
- the hood

The alarm is not switched off, even if you close the open door that has triggered it, for example.

If the alarm stays on for more than 30 seconds, the emergency call system mbrace (USA only) or TELE AID (Canada only) initiates a call to the Customer Assistance Center automatically. The emergency call system initiates the call provided that:

- you have subscribed to the mbrace/ TELE AID service.
- the mbrace/TELE AID service has been activated properly.
- the required mobile phone, power supply and GPS are available.

•► To arm: lock the vehicle with the SmartKey

•► To arm: lock the vehicle with the SmartKey or KEYLESS-GO.

Indicator lamp 1 flashes. The alarm system is armed after approximately 15 seconds.

•► To deactivate: unlock the vehicle with the SmartKey or KEYLESS-GO.

•► To stop the alarm using the SmartKey: insert the SmartKey into the ignition lock.

The alarm is switched off.
or
•► Press the button on the or SmartKey. button on the SmartKey.

The alarm is switched off.

•► To stop the alarm using KEYLESS-GO: grasp the outside door handle. The SmartKey must be outside the vehicle.

The alarm is switched off.
or
•► Press the Start/Stop button on the dashboard. The SmartKey must be inside the vehicle.

The alarm is switched off.

    See also:

    Exterior
    On all C-Class models, wedge-shaped styling features a steep rake to the windshield and back window. A familiar Mercedes grille with a three-pointed star insignia atop the sculpted hood sits up fr ...

    Resetting the panorama roof with power tilt/sliding panel and the roller sunblinds
    Reset the panorama roof with power tilt/sliding panel and the roller sunblinds if the panorama roof with power tilt/sliding panel or the roller sunblinds do not move smoothly. Turn the SmartKe ...

    Cruise control lever
    1 To activate or increase speed 2 To activate or reduce speed 3 To deactivate DISTRONIC PLUS 4 To activate at the current speed/last stored speed 5 To set the specified minimum distance ...