Important safety notes
Observe the "Important safety notes" section
ABS regulates brake pressure in such a way that the wheels do not lock when you brake.
This allows you to continue steering the vehicle when braking.
ABS works from a speed of about 5 mph(8 km/h) upwards, regardless of roadsurface conditions. ABS works on slippery surfaces, even when you only brake gently.
WARNING
If the ABS malfunctions, other driving systems
such as the BAS or the ESP® are also switched
off. Observe indicator and warning lamps that
may come on as well as messages in the
multifunction display that may appear.
If the ABS malfunctions, the wheels may lock during hard braking, reducing the steering capability and extending the braking distance.
The 
warning lamp in the
instrument
cluster lights up when the ignition is switched
on. It goes out when the engine is running.
See also:
Side impact air bags
WARNING
The pressure sensors for side impact air bag
control are located in the doors. Do not modify any components of the doors or
door
trim panels including, for example, the
addit ...
Driving tips
- Maintain a greater distance from the
vehicle in front than when driving without a
trailer.
- Avoid braking abruptly. If possible, brake
gently at first to allow the trailer to run on.
Then, ...
Making adjustments in 1 mph (Canada: 1 km/h) increments
•► Briefly press the cruise control lever to the pressure point, up 1 for a higher speed or down 2 for a lower speed.
The last speed stored is increased or reduced. ...