Removing the towing eye

  Attach cover 1 to the bumper and press  Loosen the towing eye and unscrew it.
until it engages.  Attach cover 1 to the bumper and press until it engages.
Towing the vehicle with the rear axle raised  Place the towing eye in the vehicle tool kit.

    See also:

    Turn signal lamps/side marker lamps
    ► Switch off the lights. ► Open the hood. ► Turn bulb holder 1 (WY 5 W)/2 (3457A) counter-clockwise and pull it out. ► Remove the bulb from bulb holder 1/2. ► Inse ...

    Cleaning the wiper blades
    WARNING Before cleaning the windshield or wiper blades, switch off the windshield wipers and remove the SmartKey from the ignition lock. On vehicles with KEYLESS-GO, press the Start/Stop b ...

    Lowering the vehicle
    Turn the crank of the jack counterclockwise until the vehicle is once again standing firmly on the ground. Place the jack to one side. Tighten the wheel bolts evenly in a crosswise patt ...