Installing the towing eye

tool kit.  Remove the towing eye from the vehicle tool kit.

WARNING
The exhaust tail pipe may be hot. You could burn yourself if you touch the tail pipe. Be particularly careful when removing the rear cover.

The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.

  Press the mark on cover 1 inwards in the

direction of the arrow.  Press the mark on cover 1 inwards in the direction of the arrow.
  Screw the towing eye in clockwise to the  Take cover 1 off the opening.
stop and tighten it.  Screw the towing eye in clockwise to the stop and tighten it.

    See also:

    Blind Spot Assist
    Important safety notes Blind Spot Assist uses a radar sensor system to monitor the areas on both sides of your vehicle. It supports you from speeds of approximately 20 mph (30 km/h). A warning ...

    Sport Utility Vehicle
    WARNING This Sport Utility Vehicle is designed for both on-road and off-road use. It can go places and perform tasks for which conventional 2-wheel drive passenger cars are not intended. This ...

    Selecting a station
    Selecting a station using the station search function Turn or slide the COMAND controller while the display/selection window in the radio display is active. Station search scans up or down ...