Cleaning the seat covers

clean Do not use microfiber cloths to clean genuine leather, artificial leather or Alcantara® covers. If used often, these can damage the cover.

cleaning: Observe the following when cleaning:
• clean genuine leather covers carefully with a damp cloth and then wipe the covers down with a dry cloth. Make sure that the leather does not become soaked. It may otherwise become rough and cracked. Only use leather care agents that have been tested and approved by Mercedes-Benz. You can obtain these from a qualified specialist workshop, e.g. a Mercedes-Benz Service center.
• clean artificial leather covers with a cloth moistened with a solution containing 1% detergent (e.g. dish washing liquid).
• clean cloth covers with a microfiber cloth moistened with a solution containing 1% detergent (e.g. dish washing liquid). Rub carefully and always wipe entire seat sections to avoid leaving visible lines.
Leave the seat to dry afterwards.

Cleaning results depend on the type of dirt and how long it has been there.
• clean Alcantara® covers with a damp cloth. Make sure you wipe entire seat sections to avoid leaving visible lines.

essential to Note that regular care is essential to ensure that the appearance and comfort of the covers is retained over time.

    See also:

    Control panel for 3-zone automatic climate control
    Canada only 1 Sets the temperature, left 2 Defrosts the windshield 3 Activates/deactivates the residual heat function 4 Activates/deactivates cooling with air dehumidification 5 Switches the re ...

    Introduction
    SRS consists of: the SRS warning lamp air bags air bag control unit (with crash sensors) Emergency Tensioning Devices belt force limiters SRS reduces the risk of occupants coming into ...

    Removing the ball coupling
    – Remove the spring cotter. – Remove the bolt from the ball coupling recess. – Remove the ball coupling from the ball coupling recess. – Clean the ball coupling if it is dirty. Information on ...