Points to observe before use
The sockets can be used for accessories, e.g.
lamps or mobile phone chargers with a maximum current draw of 180 W (15 A).
If you use the sockets for long periods when the engine is switched off, the battery may discharge.
Turn the SmartKey to position 1 in the ignition lock.
An emergency cut-out ensures that the on-board voltage does not drop too low. If the on-board voltage is too low, the power to the sockets is automatically cut. This ensures that there is sufficient power to start the engine.
See also:
Transmission positions
Park position
Do not shift the transmission into position P() unless the vehicle
is stationary. The parking lock should not be used as a brake when parking. In addition
to engaging the parking lo ...
Rear-view mirror
Rear-view mirror (manual anti-glare)
► anti-glare mode: flick anti-glare
switch 1 forwards or back. ...
Position of the steering wheel for driving
The steering wheel is moved to the last selected position when:
the driver's door is closed.
you insert the SmartKey into the ignition lock.
or
you press the Start/Stop button once on ve ...