Activation conditions
You can activate the HOLD function if:
• the vehicle is stationary.
• the engine is running.
• the driver's door is closed or your seat belt is fastened.
• the parking brake is not applied.
• the hood is closed.
• the transmission is in position D, R or N.
• DISTRONIC PLUS is deactivated.
See also:
Cleaning the paintwork
Scratches, corrosive deposits, areas affected
by corrosion and damage caused by
inadequate care cannot always be completely
repaired. In such cases, visit a qualified
specialist workshop, e.g. an ...
Clearing the memory of the integrated garage door opener on the rear-view mirror
X Turn the SmartKey to position 2 in the ignition lock.
X Press and hold transmitter buttons 2 and 4 for approximately 20 seconds until
indicator lamp 1 flashes rapidly. The memory is cleared.
...
Resetting the panorama roof with
power tilt/sliding panel and the roller
sunblinds
Reset the panorama roof with power tilt/
sliding panel and the roller sunblinds if the
panorama roof with power tilt/sliding panel
or the roller sunblinds do not move smoothly.
•► Turn th ...