Changing the set speed
When DSR is activated, the set speed can be changed to a value between 1 mph and 10 mph (Canada: between 2 km/h and 18 km/h) during the journey.
– To increase or decrease the set speed
in 1 mph (Canada: 1 km/h)
increments: press the cruise control lever
to the point of resistance briefly
upwards 1 for a higher set speed or briefly
downwards 2 for a lower set speed.
The set speed appears in multifunction
display 4 and is shown in status indicator
3.
The set speed also changes in 1 mph (Canada: 1 km/h) increments if you press the control lever beyond the point of resistance.
See also:
Activating/deactivating the MONO function
This function is only available in vehicles for Canada.
You can use the MONO function to adopt the temperature and air distribution settings
on the driver's side for the front-passenger side.
...
Proper use
WARNING
There are various warning stickers affixed to
your vehicle. Their purpose is to alert you and
others to various dangers. Therefore, do not
remove any warning stickers unless the
stic ...
Useful information
This Operator's Manual describes
all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differenc ...