Deactivating cruise control
There are several ways to deactivate cruise control:
– Briefly press the cruise control lever
forwards 3.
or
– Brake.
Cruise control is automatically deactivated if:
- you engage the electric parking brake.
- you are driving below 20 mph (30 km/h).
- ESP® intervenes or you deactivate ESP®.
- you activate DSR.
- you shift the transmission to position N while driving.
If cruise control is deactivated, you will hear a warning tone. You will see the Cruise Control Off message in the multifunction display for approximately five seconds.
When you switch off the engine, the last
speed stored is cleared.
See also:
Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper blades, switch off the windshield wipers
and remove the SmartKey from the ignition lock. On vehicles with KEYLESS-GO, press
the Start/Stop but ...
Coupling up a trailer
WARNING
While you are coupling or decoupling a trailer,
make sure nobody locks or unlocks the
vehicle and/or opens or closes doors or the
tailgate.
The vehicle's level could change an ...
Important safety notes
For BlueTEC vehicles only.
DEF is a non-flammable, non-toxic, colorless,
odorless and water-soluble fluid.
Rinse surfaces that have come into
contact with DEF immediately with water or ...
