Seat belts
Display messages
After starting the engine, the red seat belt warning lamp lights up for six seconds.
Possible causes/consequences and ► Solutions
The seat belt warning lamp reminds the driver and front passenger
to fasten their seat belts.
► Fasten your seat belt.
Display messages
After starting the engine, the red seat belt warning lamp lights up. In addition, a warning tone sounds for up to six seconds.
Possible causes/consequences and ► Solutions
Risk of injury
The driver's seat belt is not fastened.
► Fasten your seat belt.
The warning tone ceases.
Display messages
The red seat belt warning lamp lights up after the engine starts, as soon as the driver's or the front-passenger door is closed.
Possible causes/consequences and ► Solutions
Risk of injury
The driver or front passenger has not fastened their seat belt.
► Fasten your seat belt.
The warning lamp goes out.
Risk of injury
There are objects on the front-passenger seat.
► Remove the objects from the
front-passenger seat and stow
them in a secure place.
The warning lamp goes out.
Display messages
The red seat belt warning lamp flashes and an intermittent audible warning sounds.
Possible causes/consequences and ► Solutions
Risk of injury
The driver or front passenger has not fastened their seat belt. In
addition, you are driving faster than 15 mph (25 km/h) or you have
briefly driven faster than 15 mph (25 km/h).
► Fasten your seat belt.
The warning lamp goes out and the intermittent warning tone
ceases.
Risk of injury
There are objects on the front-passenger seat. In addition, you are
driving faster than 15 mph (25 km/h) or you have briefly driven
faster than 15 mph (25 km/h).
► Remove the objects from the
front-passenger seat and stow
them in a secure place.
The warning lamp goes out and the intermittent warning tone
ceases.
See also:
Introduction
SRS consists of:
• the
SRS warning lamp
• air bags
• air bag control unit (with crash sensors)
• Emergency Tensioning Devices/belt
buckle tensioners
• belt force limiters
SRS reduces the ri ...
Cleaning the seat belts
► Use clean, lukewarm water and soap
solution.
Do not clean the seat belts using chemical
cleaning agents. Do not dry the seat belts
by warming them above 176 °F (80 °C) or
placing them i ...
Setting the airflow
Turn the SmartKey to position 2 in the ignition lock.
To increase/reduce: press the
or
button.
...