Changing the set speed whilethe vehicle is in motion
When DSR is activated, the control speed can be changed to a value between 3 mph and 10 mph (Canada: between 4 km/h and 18 km/h) during the journey.
► To increase or decrease in 1 mph (Canada: 1 km/h) increments: press the cruise control lever to the point of resistance briefly upwards 1 for a higher control speed or briefly downwards 2 for a lower control speed.
The set value appears in the multifunction display.
► To increase or decrease in 5 mph (Canada: 10 km/h) increments: push the cruise control lever beyond the point of resistance briefly upwards 1 for a higher control speed or briefly downwards 2 for a lower control speed.
The set value appears in the multifunction display.
See also:
Problems with PARKTRONIC
Problem
Possible causes/consequences and
Solutions
Only the red segments in the PARKTRONIC warning displays
are lit.
You also hear a warning tone for approximately two ...
Lowering the vehicle
– Place the ratchet wrench onto the hexagon
nut of the jack so that the letters AB are
visible.
– Turn the ratchet wrench until the vehicle is
once again standing firmly on the ground.
– Place ...
Turn signals
Turn signals
1 High-beam headlamps
2 Right turn signal
3 High-beam flasher
4 Left turn signal
To indicate briefly: press the combination
switch briefly to the pressure point in the
d ...