Seat belt

Display messages Possible causes/consequences and Solutions
the engine, the red seat belt warning lamp lights up for six seconds.

After starting the engine, the red seat belt warning lamp lights up for six seconds.

 The seat belt warning lamp reminds the driver and front passenger to fasten their seat belts.
  • Fasten your seat belt ().
the engine, the red seat belt warning lamp lights up. In addition, a warning

After starting the engine, the red seat belt warning lamp lights up. In addition, a warning tone sounds for up to six seconds.

 Risk of injury

The driver's seat belt is not fastened.

  • Fasten your seat belt (). The warning tone ceases.
seat belt warning lamp lights up after the engine starts, as soon as the

The red seat belt warning lamp lights up after the engine starts, as soon as the driver's or the front-passenger door is closed.

 Risk of injury The driver or front passenger has not fastened their seat belt.
  • Fasten your seat belt (). The warning lamp goes out.

There are objects on the front-passenger seat.

  • Remove the objects from the front-passenger seat and stow them in a secure place. The warning lamp goes out.
seat belt warning lamp flashes and an intermittent audible warning sounds.

The red seat belt warning lamp flashes and an intermittent audible warning sounds.

 Risk of injury

The driver or front passenger has not fastened their seat belt. In addition, you are driving faster than 15 mph (25 km/h) or you have briefly driven faster than 15 mph (25 km/h).

  • Fasten your seat belt (). The warning lamp goes out and the intermittent warning tone ceases.

There are objects on the front-passenger seat. In addition, you are driving faster than 15 mph (25 km/h) or you have briefly driven faster than 15 mph (25 km/h).

  • Remove the objects from the front-passenger seat and stow them in a secure place. The warning lamp goes out and the intermittent warning tone ceases.
    See also:

    Storing stations
    Storing stations manually There are twenty presets available for the FM and AM wavebands. Quick save: press and hold a number key, e.g. , until you hear a tone. The station is stored. Direct ...

    Function restrictions
    For safety reasons, some COMAND functions are restricted or unavailable while the vehicle is in motion. You will notice this, for example, because you will either not be able to select certain ...

    Engaging park position P
    - Push the DIRECT SELECT lever in the direction of arrow P. The automatic transmission shifts automatically into park position P if you open the driver's door when the vehicle is station ...