Activating

  • To open the tailgate: pull the handle on the tailgate.
  • To stop the opening procedure at the desired position: press the closing button () in the tailgate or pull the handle on the outside of the tailgate again.
  • To store the position: press and hold the closing button in the tailgate until you hear a short tone.

The opening angle limiter is activated. The tailgate will now stop in the stored position when opening.

after it has stopped automatically. This does not delete the stored position. If you wish to open the tailgate fully, pull the handle of the tailgate again after it has stopped automatically. This does not delete the stored position.

    See also:

    Correct driver's seat position
    Observe the safety guidelines on seat adjustment. - Check whether you have adjusted seat 3 properly. Electrical seat adjustment When adjusting the seat, make sure:     - you ...

    Removing the mechanical key
    Push release catch 1 in the direction of the arrow and at the same time, remove mechanical key 2 from the SmartKey. ...

    Switching on/off
    The three red indicator lamps in the button indicate the heating level you have selected. If the battery voltage is too low, the seat heating may switch off. One or more of the indicator lamp ...