Towing the vehicle with the rear axle raised
Only possible on vehicles without 4MATIC.
When towing your vehicle with the rear axle raised, it is important that you observe the safety instructions.
The ignition must be switched off if you are towing the vehicle with the rear axle raised. Intervention by ESP® could otherwise damage the brake system.
Switch on the hazard warning lamps.
Turn the SmartKey to position 0 in the ignition lock and remove the SmartKey from the ignition lock.
When leaving the vehicle, take the SmartKey or the KEYLESS-GO key with you.
See also:
Activating video DVD mode
Option 1
Insert a video DVD.
COMAND loads the medium inserted and
starts to play it.
Option 2
Select Video in the main function bar by
sliding and turning
the COMAND
controller and pres ...
Switching locator lighting on/off
If you switch on the locator lighting, the
following come on in the dark after you have
unlocked the vehicle using the remote
control:
• the parking lamps
• the tail lamps
• the license ...
Vehicle tool kit
The vehicle tool kit can be found in the
stowage well under the trunk floor.
Lift the trunk floor up.
1 Vehicle tool kit tray
2 Stowage well
3 Spare wheel/"Minispare" emergenc ...