Releasing the electric parking brake automatically

The electric parking brake is released automatically when the following conditions are simultaneously fulfilled:
• the engine is running.
• the automatic transmission is in position D or R.
• the hood is closed.
• your seat belt is fastened.
• you depress the accelerator pedal.

If the automatic transmission is in position R, the trunk lid must be closed.

If your seat belt is not fastened, the following conditions must be fulfilled to automatically release the electric parking brake:
• the driver's door is closed.
• you shift out of P or you have previously driven faster than 3 km/h.
• you have shifted out of P or you have previously driven faster than 2 mph (3 km/h).

    See also:

    Cargo compartment cover
    Important safety notes When loading the vehicle, make sure that you do not stack the load in the cargo compartment higher than the lower edge of the side windows. Do not place heavy objects on ...

    High-beam headlamps
    •► To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. •► Turn the light switch to or . •► Press the combination ...

    Tire tread
    WARNING Although the applicable federal motor vehicle safety laws consider a tire to be worn when the tread wear indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we recomm ...