Vehicles with automatic transmission
Apply the electric parking brake.
Shift the transmission to position P.
Using the SmartKey
Turn the SmartKey to position 0 in the ignition lock and remove it.
The immobilizer is activated.
If you turn off the engine with the SmartKey and then remove it from the ignition lock or open a front door, the automatic transmission shifts to P automatically.
Using KEYLESS-GO
Press the Start/Stop button.
The engine stops and all the indicator
lamps in the instrument cluster go out.
When the driver's door is closed, this corresponds to SmartKey position 1. When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey removed".
If you use the Start/Stop button to switch off the engine, the automatic transmission shifts to N automatically. If you then open the driver's or front-passenger door, the automatic transmission shifts to P.
In an emergency, the engine can be turned off while the vehicle is in motion by pressing and holding the Start/Stop button for three seconds. This function operates independently from the ECO start/stop automatic engine switch-off function.
See also:
Switching the button lighting on/off
Press button 2 on the remote control.
Depending on the previous status, the
button lighting is switched on or off.
If you do not use the remote control for
about 15 seconds, the button light ...
New for 2011
There are no major changes, but "mbrace," a new telematics system, replaces
Tele Aid and has features such as locating a vehicle in a parking lot and
remotely locking and unlocking doors ...
Using the SmartKey
– Turn the SmartKey to position 0 in the
ignition lock and remove it.
The immobilizer is activated.
If you turn off the engine with the
SmartKey and then remove it from the
ignition lock ...