Cornering light function
The cornering light function improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for example. It can only be activated when the low-beam headlamps are switched on.
Active: if you are driving at speeds below 25 mph (40 km/h) and switch on the turn signals or turn the steering wheel.
Not active: if you are driving at speeds above 25 mph (40 km/h) or switch off the turn signal or turn the steering wheel to the straight-ahead position.
The cornering light function may remain lit for a short time, but is automatically switched off after no more than three minutes.
See also:
Important safety notes
If a tire pressure monitor system is installed,
the vehicle's wheels have sensors that
monitor the tire pressures in all four tires. The
tire pressure monitor warns you when the
pressure drops ...
Vehicle identification plate with
vehicle identification number (VIN)
and paint code number
– Open the driver's door.
You will see vehicle identification plate 1.
Example: vehicle identification plate (USA only)
2 Paint code
3 VIN
Example: vehicle identification plate (Canad ...
All-weather tires and winter tires
Not all tires that have the M+S
identification offer the driving
characteristics of winter tires. Winter tires
have, in addition to the M+S identification,
the snow flake symbol on the tire ...