Cleaning the display
Before cleaning the display, make sure that
it is switched off and has cooled down.
Clean the display surface using a
commercially-available microfiber cloth
and TFT/LCD display cleaner.
Dry the display surface using a dry
microfiber cloth.
For cleaning, do not use any of
the
following:
• alcohol-based thinner or gasoline
• abrasive cleaning agents
• commercially-available household
cleaning agents
These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display.
See also:
Entering an intermediate stop
Introduction
When route guidance is active, you can enter
an intermediate stop. Intermediate stops can
be predefined destinations from the following
categories that COMAND offers for selection: ...
Replacing the windshield wiper blades
Removing the wiper blades
Before changing the wiper blades, always set the wiper arms to a vertical position
using the combination switch. There is otherwise a risk of damaging the hood.
Moving ...
Engine number
1. Emission control information plate,
including the certification of both federal
and Californian emissions standards
2. Engine number (stamped into the
crankcase)
3. VIN (on the lower edge ...