Tires
| Problem | Possible causes/consequences and
Solutions |
![]() USA
only: |
Risk of accident
The tire pressure monitor has detected a loss of pressure in at
least one of the tires. |
![]() USA
only: |
The tire pressure monitor is faulty. Observe the additional
display messages in the multifunction
display. Visit a qualified
specialist workshop. |
WARNING
Each tire, including the spare (if provided), should be checked at least every
two weeks when
cold and inflated to the pressure recommended by the vehicle manufacturer on the
Tire and
Loading Information placard on the driver's door B-pillar or, if available, the
tire pressure label
on the inside of the fuel filler flap. If your vehicle has tires of a different
size than the size indicated
on the Tire and Loading Information placard or the tire pressure label, you
should determine the
proper tire pressure for those tires.
As an added safety feature, your vehicle has been equipped with a tire pressure
monitoring
system (TPMS) that illuminates a low tire pressure telltale when one or more of
your tires are
significantly underinflated. Accordingly, when the low tire pressure telltale
illuminates, you should
stop and check your tires as soon as possible, and inflate them to the proper
pressure. Driving
on a significantly underinflated tire causes the tire to overheat and can lead
to tire failure.
Underinflation also reduces fuel efficiency and tire tread life, and may affect
the vehicle's handling
and stopping ability. Please note that the TPMS is not a substitute for proper
tire maintenance,
and it is the driver's responsibility to maintain correct tire pressure, even if
underinflation has
not reached the level to trigger illumination of the TPMS low tire pressure
telltale.
USA only:
Your vehicle has also been equipped with a TPMS malfunction indicator to
indicate when the
system is not operating properly. The TPMS malfunction indicator is combined
with the low tire
pressure telltale. When the system detects a malfunction, the telltale will
flash for approximately
1 minute and then remain continuously illuminated. This sequence will be
repeated every time
the vehicle is started as long as the malfunction exists. When the malfunction
indicator is
illuminated, the system may not be able to detect or signal low tire pressure as
intended.
TPMS malfunctions may occur for a variety of reasons, including the installation
of incompatible
replacement or alternate tires or wheels on the vehicle that prevent the TPMS
from functioning
properly. Always check the TPMS malfunction telltale after replacing one or more
tires or wheels
on your vehicle to ensure that the replacement or alternate tires and wheels
allow the TPMS to
continue to function properly.
See also:
Cruise control lever
1 To switch on or to increase the speed
2 To switch on or to reduce the speed
3 To deactivate cruise control
4 To switch on with the current speed or
with the last stored speed
When you ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differe ...
Parking brake
WARNING
Engaging the parking brake while the vehicle
is in motion can cause the rear wheels to lock
up. You could lose control of the vehicle and
cause an accident. In addition, the vehicle ...

Solutions
Risk of accident