Lights

Switching the daytime running lamps on/off

This function is not available in Canada.
If you have activated the Day Lights function and the light switch is in the position, the daytime running lamps or are position, the daytime running lamps are switched on automatically during the day when the engine is running.

In the dark, the following also light up:
Х the low-beam headlamps
Х the parking lamps
Х the tail lamps
Х the license plate lamp
Х the side marker lamps

or Press the button on the or steering wheel to select the Sett. menu. button on the steering wheel to select the Sett. menu.
or Press the button to select the or Lights submenu. button to select the Lights submenu.
button to confirm. Press the Press the button to confirm.
or Press the button to select the or Day Lights function. button to select the Day Lights function.
If the Daytime Running Lights: function has been switched on, the cone of light and the display are shown in red. symbol in the multifunction display are shown in red.
button to save the setting. Press the Switching Adaptive Highbeam Assist on/ button to save the setting.

Switching Adaptive Highbeam Assist on/ off

or Press the button on the or steering wheel to select the Sett. menu. button on the steering wheel to select the Sett. menu.
or Press the button to select the or Lights submenu. button to select the Lights submenu.
button to confirm. Press the Press button to confirm.
or Press to select the Adapt. or Highbeam function. to select the Adapt.

Highbeam function.
If the Adapt. Highbeam function has been switched on, the cone of light and the are shown in red. symbol in the multifunction display are shown in red.
button to save the setting. Press the Activating/deactivating surround button to save the setting.

Activating/deactivating surround lighting and exterior lighting delayed switch-off

If you have activated the Surround Lighting function and the light switch is in the position, the following or functions are active when it is dark: position, the following functions are active when it is dark:
Х Surround lighting: the exterior lighting remains lit for 40 seconds after unlocking with the SmartKey. The exterior lighting switches off when you open the driver's door.
Х Exterior lighting delayed switch-off: the exterior lighting remains lit for 60 seconds after the engine has been switched off. If you close all the doors, the exterior lighting goes off after 15 seconds.

If you activate the Surround Lighting function, the following light up depending on the vehicle's equipment:
Х the parking lamps
Х the fog lamps
Х the daytime running lamps
Х the side marker lamps
Х the surround lighting in the exterior mirrors

or Press the button on the or steering wheel to select the Sett. menu. button on the steering wheel to select the Sett. menu.
or Press the button to select the or Lights submenu. button to select the Lights submenu.
button to confirm. Press the Press the button to confirm.
or Press the button to select the or Surround lighting function. button to select the Surround lighting function.
When the Surround Lighting function is activated, the light cone and the area around the vehicle are displayed in red in the multifunction display.
button to save the setting. Press the Deactivating delayed switch-off of the button to save the setting.

Deactivating delayed switch-off of the exterior lighting temporarily:
the Before leaving the vehicle, turn the SmartKey to position 0 in the ignition lock.
the Turn the SmartKey to position 2 in the ignition lock and back to position 0.
The exterior lighting delayed switch-off is deactivated.

Delayed switch-off of the exterior lighting is reactivated the next time you start the engine.

Activating/deactivating the interior lighting delayed switch-off

If you activate the Light. delay function, the interior lighting remains on for 20 seconds after you remove the SmartKey from the ignition lock.
or Press the button on the or steering wheel to select the Settings button on the steering wheel to select the Settings menu.
or Press the button to select the or Lights submenu. button to select the Lights submenu.
button to confirm. Press the Press the button to confirm.
or  button to select the Press theor  button to select the or Light. Delay function. button to select the Light. Delay function.
When the Light. Delay function is activated, the vehicle interior is displayed in red in the multifunction display.
button to save the setting. Press the Vehicle button to save the setting.

    See also:

    Cup holder in the front-compartment center console
    1 Cup holders ...

    Range of the sensors
    General notes The sensors must be free of dirt, ice and slush; otherwise they may not function correctly. Clean the sensors regularly, taking care not to scratch or damage them. Side view ...

    Using the SmartKey
    The SmartKey must be close to the driver's door handle. - Point the tip of the SmartKey at the driver's door handle. - Press and hold the button until the side windows and the sliding s ...